GSM-gateway G20 and G8 are certified with Elastix

 GSM gateway G20 and G20 are certified with ElastixWe are glad to announce the Multichannel GSM-gateway Polygator G20 has passed successfully the tests of the Elastix Hardware Certification Program (EHCP). Certification extended to model Multichannel GSM-gateway Polygator G8 as well. You can check this out on the EHCP website:

 Elastix - is an Open Source Sofware to establish Unified Communications. It is an Asterisk Based distro.

Read more: GSM-gateway G20 and G8 are certified with Elastix

USB-port for GSM socket

External USB-port in a new version of Rebooter alows to transmit commands to the device same way as by SMS-commands and receive alarm/status messages via USB besides common SMS-messages.

Read more: USB-port for GSM socket

GSM Board without External Feeders

GSM Board without External Feeders

Improved version of PCI VoIP GSM board without external feeders means there are no aerial wires on the board surface. Instead, aerial path is made as a separate layer in the multilayer printed circuit board. Such configuration is more reliable and minimizes the possibility of mechanical damages and failures of connecting aerial wires.

Read more about PCI GSM-card

IMEI code processing support for 3G-versions (UMTS) of gateways and cards

Paid option "IMEI processing" is available for order for 3G-versions (UMTS) of gateways and PCI-cards. This options opens access to information about IMEI-code of UMTS/GSM-modules via special commands.

Multifunction GSM Alarm

GSM Alarm is a compact (88x56x22mm) device powered from 9...36V DC source that has a built-in big capacity Li-Ion battery and allows for monitoring of six basic and four auxiliary inputs configured either as a discrete input or as a decoder each within the range of up to 24V, and for controlling two outputs with an open collector loaded up to 24V 0.2A (with external relays, the power supply of two device groups of up to 3kW each may be controlled). In addition, the ambient temperature, supply voltage and battery voltage are monitored.

Read more: Multifunction GSM Alarm

Hybrid mode: concurrent PRI and VoIP support for K32

Hybrid mode (PRI and VoIP concurrently) is implemented for gateways of K32 series. This allows flexible switching to VoIP technology for owners and buyers of PRI-versions of К32 GSM-gateway.

Hybrid mode allows to assign certain GSM-channels to work with PRI trunk and certain channels to work with VoIP in a single device.


Contact Details

POLYGATOR (manufacturer)

This email address is being protected from spambots. You need JavaScript enabled to view it.



+380(56)719-9030 (Office Landline)
+380(67)527-4171 (Mob/Telegram)

UK+44(203)769-1858 (Virt.Landline)

USA+1(312)940-6939 (Virt.Landline)

Compatibility Short-list

Native drivers Certified with Tested with Technologies
(PCI GSM Interface Card for 4/8 SIM-cards)


SoftSwitch, IP-PBX

VoIP Billing

SMS software



G.729 G.711 G.723 G.726 DTMF

SMS protocols
SMPP SMTP AT-commands SMS-via-SQLLite (Under Asterisk)

Website by wwsiter